| Availability: | |
|---|---|
| Quantity: | |
2“-48”
J-VALVES
DIN Cast Steel DN80 PN25 Flange Gate Valve
The DIN cast steel DN80 PN25 flanged gate valve is a high-quality valve product that is widely used in industrial pipeline systems. It is made of cast steel, featuring robustness, durability and strong corrosion resistance, and can adapt to a variety of complex working conditions. Its nominal diameter is DN80 and the nominal pressure is PN25. It complies with the DIN standard and is suitable for the transportation and control of various media.
J-VALVES carbon steel wedge gate valve are designed, constructed, and tested according to API and ASME/ANSI Standards. Other international standards including JIS、 BS and DIN are also available upon request.
Technical specifications:
Bolted Body, Full Port Construction
Fully Compliant to DIN 3352
Fully Compliant to DIN 3230
Flange Fully Compliant to DIN 2543-2545/ DIN2501
Submerged Packing System & Direct Mount Actuation
Product Specification:
Size: 1/2"~48"(DN15~DN1200)
Pressure Rating: 150LB~2500LB(PN20~PN420)
Material: A216 WCB/A352 LCB/A217 WC6/A217 WC9/A351 CF8/A351 CF3M/A351 CF3/A351 CF8M etc
Suitable Temperature: -196ºC~538ºC.
Suitable Medium: Water, Steam, Oil and natural gas etc.
Product Feature:
CNC machine tool processing, high precision, good sealing .
With sealing design, it is more safe and convenient to replace packing( Seat seal material could be decided by customer's request or according to valve's medium & temp. condition).
Operation: Hand wheel, Gear,Pneumatic actuator & Electric Actuator.
Note: All the data should be confirmed with the approved drawings of manufacturer.
Tips:
We also manufacture other type valves, as check valve, globe valve, Y straine, Any item meets your interest, anything confused you, pls keep me posted, let's talk more.
J-VALVES Service:
On Samples Buyer bear the air fee, but this fee will be reduced from order directly
On After Sales Free replacement if there is any quality problem
On Delivery Never delay delivery time
On Materials Ensure material pure
Ensure material pure
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.