| Availability: | |
|---|---|
| Quantity: | |
J-VALVES-BV-1/2
J-VALVES
8481804090
High Strength and Corrosion Resistance: The valve body and valve core are made of duplex stainless steel F51, which combines high strength and excellent corrosion resistance.
Excellent Sealing Performance: Adopting advanced sealing technology, the floating valve seat design ensures tight contact with the ball through spring preload, achieving zero leakage under both normal and extreme conditions.
Flexible Operation: Equipped with a handwheel operating mechanism, it features low operating torque and flexible opening/closing. Pneumatic or electric actuators can be optionally equipped to realize automatic control.
Fire Safety: Fire-resistant design complies with API 607 and API 6FA standards, ensuring safety under extreme conditions such as fires.
Anti-static Design: Complies with BS 5351 standard, effectively preventing static accumulation and improving operational safety.
Threaded Connection: Uses NPT threaded connection for convenient and quick installation, enabling fast connection to standard pipeline threads.
Full Bore Design: Full-port ball valve with the same inner diameter as the pipeline, resulting in low fluid resistance and large flow rate.
Nominal Diameter: 1-1/2" (DN40)
Pressure Rating: 1000PSI (approximately 6.9MPa)
Applicable Media: Water, natural gas, oil products, corrosive liquids, etc.
Operating Temperature Range: -20℃ to 210℃
Valve Body Material: Duplex stainless steel F51
Sealing Material: PTFE (Polytetrafluoroethylene)
Connection Type: Threaded connection (NPT)
Operation Mode: Handwheel operation, optional pneumatic or electric actuator
Design Standards: API 608, API 6D, ASME B16.34
Testing Standard: API 598
Oil and Gas Industry: Used in natural gas pipelines and oil transportation systems to ensure reliable cut-off of media.
Chemical Industry: Suitable for handling corrosive chemical media such as sulfuric acid and phosphoric acid.
Water Treatment Industry: Applied in urban water supply and sewage treatment systems.
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.