| Availability: | |
|---|---|
| Quantity: | |
1/2“-10”
J-VALVES
Main Features
Low-platform design: The valve's operating handle is positioned low, facilitating installation and operation while saving space. It is suitable for use in confined spaces.
Floating ball structure: The ball can float freely under the pressure of the medium, ensuring reliable sealing performance. Even under low pressure, it can achieve a good sealing effect.
Full-bore design: There is no diameter reduction in the internal flow channel of the valve, resulting in low medium flow resistance and large flow rate. It is suitable for working conditions with high flow demand.
Stainless steel material: Main components such as the valve body and ball are made of high-quality stainless steel (e.g., 304, 316), which has good corrosion resistance and is applicable to various chemical media.
Fire-safe design: Compliant with the API 607 fire safety standard, it can maintain sealing in extreme situations such as fires to prevent medium leakage.
Blow-out proof stem design: The stem adopts a blow-out proof structure, which can ensure operational safety even under high-pressure working conditions and prevent the stem from being blown out.
Quick opening and closing: The valve can be fully opened or closed by rotating 90°, featuring simple and quick operation, and is suitable for working conditions requiring frequent operation.
Multiple sealing materials available: According to the working condition requirements, sealing materials such as PTFE and RPTFE can be selected to meet the needs of different temperatures and media.
Technical Specifications
Size range: 1/2" to 12" (DN15 to DN300).
Pressure class: 150LB ~ 2500LB
Operating temperature: -20℃ to 180℃ (with PTFE seal); can be extended to higher temperatures depending on the material.
Applicable media: Water, oil, gas, acidic media, etc.
Connection method: Flange connection, compliant with ASME B16.5 standard.
Design standards: Compliant with ASME B16.34, API 608, etc.
Testing standard: API 598.
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.