| Availability: | |
|---|---|
| Quantity: | |
DN250 PN10 4A One Way Check Valve
Nominal Diameter: 1" ~ 40" (DN25 ~ DN1000)
Nominal Pressure: 150LB (PN16 ~ PN20)
Applicable Media: Water, steam, oil, natural gas, corrosive liquids, etc.
Applicable Temperature Range: -20℃ ~ 200℃
Connection Method: Flange connection
Sealing Form: Metal seal or soft seal
Design Standards: Comply with international general standards, such as API, ANSI, GB/T, etc.
One-way Flow: The internal structure design of the valve ensures that the fluid can only flow in one direction and prevents backflow.
Quick Response: The valve disc can close quickly, effectively reducing the water hammer phenomenon.
Low Flow Resistance Design: The flow channel is reasonably designed, with low resistance when the fluid passes through, improving the system efficiency.
Reliable Sealing: High-quality sealing materials are used to ensure the sealing performance of the valve during long-term use.
High Durability: The main body materials are usually cast iron, cast steel or stainless steel, which have good corrosion resistance and mechanical strength.
Convenient Installation: The flange connection method is convenient for installation and maintenance and is suitable for various piping systems.
Chemical Industry: Used for transporting corrosive liquids, preventing the backflow of media, and protecting equipment and pipelines.
Petroleum and Natural Gas Industry: In oil and gas transmission pipelines, it prevents the backflow of fluids and ensures the safety of the system.
Water Treatment Industry: Used in water supply and drainage systems to prevent the backflow of water and avoid water quality pollution.
Steam System: In steam pipelines, it prevents the backflow of steam and improves the system efficiency and safety.
Food and Pharmaceutical Industry: Used for transporting food-grade liquids or liquid medicines, ensuring the one-way flow of fluids and meeting hygiene standards.
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.