| Size: | |
|---|---|
| pressure: | |
| Availability: | |
| Quantity: | |
DN100 PN16 Carbon Steel GS-C25 Flange Y Type Bellows Globe Valve
Main Features
Bellows Sealing: High-quality stainless steel bellows are adopted, welded between the bonnet and the valve stem to form a double seal, effectively preventing medium leakage. It is especially suitable for transporting hazardous media such as toxic, flammable, and explosive substances.
Y-Type Structure: The valve body adopts a Y-type design with a smooth flow channel, resulting in low medium flow resistance and excellent regulating performance, enabling precise flow control.
Strong Durability: The valve body is made of carbon steel, featuring high strength and good corrosion resistance. It is suitable for various working conditions and has a long service life.
Flange Connection: The flange design complies with DIN standards, ensuring convenient installation, reliable sealing, and easy connection with other pipeline systems.
Manual Operation: Equipped with a handwheel operating mechanism, it is easy to operate, with flexible opening and closing, and can easily adjust the medium flow as needed.
Convenient Maintenance: The bellows design can reduce the wear of the valve stem packing, lowering the maintenance frequency. Meanwhile, the valve has a compact structure, facilitating disassembly and overhaul.
Technical Parameters
Nominal Diameter: 1/2"~16" (DN15~DN400)
Nominal Pressure: 150LB~1500LB (PN20~PN260)
Working Temperature: -20℃ to 300℃ (the specific temperature range can be adjusted according to the bellows material)
Applicable Media: Water, steam, oil products, natural gas, etc.
Valve Body Material: Carbon steel (GS-C25)
Sealing Materials: Bellows (stainless steel 304/316), packing (flexible graphite/PTFE)
Valve Stem Material: Stainless steel (2Cr13/304/316)
Flange Standard: DIN EN1092-1
Structure Length: Complies with DIN 3202 standard
Design and Manufacturing Standards: DIN 3356
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.