| Availability: | |
|---|---|
| Quantity: | |
Product Features
High-Quality Material: The valve body is made of carbon steel WCB, compliant with ASTM A216 standards. It has high strength and excellent corrosion resistance, enabling adaptation to a wide range of media and working conditions.
Flanged Connection: Adopts flange connection methods in accordance with ANSI B16.5 or ANSI B16.47 standards, with a raised face (RF) sealing surface. The connection is firm and features outstanding sealing performance, effectively preventing leakage.
Swing-Type Structure: The valve disc adopts a swing-type design, allowing flexible opening and closing actions, low fluid resistance, rapid response to changes in fluid flow, and reduction of water hammer effects.
High Pressure Rating: With a pressure rating of 300lb, it can handle high-pressure working conditions and is suitable for various industrial fluid systems.
Wide Range of Applicable Media: Suitable for various media such as water, steam, oil products, natural gas, acids, alkalis, and organic compounds.
Compatibility with Multiple Standards: Compliant with international standards including API 6D, BS 1868, and ASME B16.34, ensuring the versatility and reliability of the product.
Easy Maintenance: The valve has a compact structure and reasonable design, facilitating maintenance and overhaul, and reducing maintenance costs.
Technical Parameters
Nominal Diameter: 12 inch (DN300)
Pressure Rating: 300lb (PN420)
Material: Carbon steel WCB
Connection Method: Flanged connection (RF)
Applicable Temperature Range: -29℃ to +429℃
Applicable Media: Water, steam, oil products, natural gas, acids, alkalis, organic compounds, etc.
Testing Standards: API 598 etc.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.
Test water, end caps, desiccant and stem position: what six months in a yard does to a stored valve, and the incoming checks that catch it first.
Shrinkage, gas porosity, sand and hot tears in cast steel valve bodies: what radiography, ultrasonic, magnetic particle and penetrant testing each can find.
Flash vessel design and flash steam recovery: flash fraction formula, Souders-Brown sizing, hold-up, LP header and deaerator routing, failure diagnosis.
Wet shaft and dry shaft butterfly valves: what reaches the bearing, which part wears first, and why the disc stops centering in the bore.
Steam trap selection: float, inverted bucket, thermodynamic and thermostatic types, sized on load times safety factor at true differential pressure.
Between the handle and the ball there are four fits. Which one shears, which one cracks, and how a few degrees of lost motion hides a valve that never seated.
Reverse flow through a check valve has six mechanical causes. How hinge wear, debris and a moved seat ring look different, and which test finds each.