| Availability: | |
|---|---|
| Quantity: | |
Electric Actuated 3 Way T/L Port Thread Ball Valve
Product Features
Electric Actuator: Equipped with a high-precision electric actuator, it supports remote control and automated operation, and can achieve rapid on-off and precise adjustment.
T-shaped and L-shaped Channels:
T-shaped Channel: Allows fluid to enter from two inlets and mix, or diverts fluid from one inlet to two outlets.
L-shaped Channel: Used for switching the flow direction of fluid, switching fluid from one inlet to one of the two perpendicular outlets.
Threaded Connection: Adopting the threaded connection method, it is convenient for installation and has good sealing performance, and is suitable for a variety of pipeline systems.
Material Advantage: The valve body and ball are usually made of stainless steel, which has good corrosion resistance and mechanical properties and is suitable for a variety of media.
Sealing Performance: High-performance sealing materials such as PTFE are adopted to ensure that the valve can achieve reliable sealing under various working conditions.
Multiple Control Modes: It supports multiple control modes such as on-off type and regulating type to meet different process requirements.
Technical Parameters
Nominal Size: 1/4"~3" (DN6~DN80)
Working Pressure: 1000WOG
Working Temperature: -20 °C~180 °C
Valve Body Material: Stainless steel 304, 316, etc.
Sealing Material: PTFE, etc.
Connection Method: Threaded connection (in line with ISO 7-1 standard)
Actuator Parameters:
Power Supply Voltage: 24V AC/DC, 110V AC, 220V AC, etc.
Protection Grade: IP67
Output Torque: 10Nm to 4000Nm (options available for different models)
Running Time: 10 seconds to 58 seconds (depending on the model)
Application Scenarios
Chemical Industry: Used to control the diversion and mixing of corrosive chemical media to ensure the safety and stability of the production process.
Pharmaceutical Industry: In the drug production process, it is used to control the flow direction of liquid medicine to meet hygienic requirements.
Food and Beverage Industry: Used to control fluid media in the production process of food and beverages, such as water, syrup, and fruit juice, to ensure the quality and safety of products.
Water Treatment Industry: In water supply and drainage systems and sewage treatment plants, it is used to control the on-off and flow regulation of water.
Petroleum and Natural Gas Industry: Used to control the flow direction of oil and gas in the processes of oil and gas exploration, transportation and processing.
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.