| Availability: | |
|---|---|
| Quantity: | |
Main Features
Cryogenic application: The valve is specially designed and treated to be suitable for extremely Cryogenic
environments (down to -196°C), ensuring no deformation or phase change under Cryogenic conditions.
Axial flow design: Based on the Venturi effect, the optimized design of the flow channel area allows for rapid full opening, reducing flow resistance. At the same time, it ensures quick closing when the flow rate decreases, avoiding water hammer effect.
Non-impact closing: Equipped with a spring-assisted system to achieve non-impact closing, reducing maintenance requirements and extending service life.
Quick response: The valve disc responds quickly to changes in flow rate, enabling rapid closing when the flow rate decreases to limit backflow and valve impact.
Compact design: With a compact structure and light weight, it is suitable for horizontal, vertical or inclined installation, saving space.
Fire safety certification: Compliant with API 607 and API 6FA fire safety standards, ensuring sealing performance is maintained even in extreme situations such as fires.
Multiple connection methods: Flange connections (RF, FF, etc.) are available, in line with ASME B16.47 standards.
Zero leakage design: No valve cover or other openings, ensuring no leakage paths and achieving zero emissions.
Technical Specifications
Nominal diameter: 24 inches (DN600)
Pressure class: 900LB (PN15.0 MPa)
Applicable media: Cryogenic media such as liquefied natural gas (LNG), ethylene, oxygen, hydrogen, liquefied petroleum gas (LPG), etc.
Applicable temperature: -196°C to 150°C
Valve body material: Carbon steel (LCB)
Sealing material: Stainless steel, PTFE, etc.
Connection method: Flange connection, conforming to ASME B16.47 standards
Design and manufacturing standards: API 6D, ASME B16.34
Testing standards: API 598, API 607
A knife gate valve has no seat pocket and no wedge: a beveled blade crosses the bore and cuts what is in it. Where it seals, where it cannot, what to order.
A Y type check valve puts the seat in a 45 degree branch and keeps the disc out of the bore. Orientation, cap access, failure points and what to specify.
Chlorine valve selection: the 150 ppm dry/wet divide, vapour pressure arithmetic, liquid-full cavity expansion to 390 bar, and proven relief paths.
Line pressure under the plug cancels axial thrust in a pressure balanced plug valve. What that buys in torque, what it costs, and how it fails silently.
Why oxygen valves burn: adiabatic compression arithmetic, EIGA velocity and exemption tables, PTFE limits and CGA G-4.1 cleaning rules.
What ASME and PED dual certification really requires: valve categories, modules, CE marking, material routes, the WCB Charpy trap and shipping documents.
Why a single disc wafer check valve lives inside the flange gap, what the line gasket does to its seat, which way to mount it, and what to order.
ASME B16.34 pressure-temperature ratings explained: material groups, the Class 150-2500 table, interpolation, Special Class limits and Class versus PN.
Why a T type strainer holds more screen than a Y type, where it belongs in the line, how the blowdown is used, and what to write on the enquiry.
Valve spare parts planning: failure data, interchangeable groups, Poisson stocking levels, kit contents, shelf life, lead times and repair vs replace.
Thermal growth eats the wedge guide clearance, the stem pushes the wedge into the seat, and packing tightens itself. What to check before blaming the valve.
Steam humidification guide: psychrometric load sizing, isothermal vs adiabatic, steam quality, control valve Kv selection, absorption distance limits.
Which parts of a gate, globe or check valve actually wear, what to keep on the shelf, and why a spare bought for the same size still will not fit.
Valve storage and preservation guide: ISO 2230 elastomer shelf life, nitrogen blanket storage, VCI protection, cycling schedules and RFQ clauses.
Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.Same size, same class, different length. Where the face-to-face number comes from, what to measure before ordering, and what a forced fit does to the joint.
What EN 10204 3.1 and 3.2 certificates prove for valve procurement: the stockist clause, PED category rules, PMA and heat number traceability checks.
A globe valve has a front and a back. Flow under the disc or over it decides where the pressure sits when shut, and which end of the stroke is hard.
Gear operator sizing from valve torque: breakaway vs running torque, MSS SP-91 handwheel force limits, MAST stem checks, ratio and turns arithmetic.
Stem up, sideways or down: what each does to the bonnet cavity and packing, plus correct orientation for swing checks, Y strainers and butterfly valves.
Class 125 is 13.8 bar and a ductile iron main can surge to 24. Why the body material decides whether a water valve cracks or bulges, with the arithmetic.